What is the Best Gas Pole Saw of 2019?

Share on facebook
Share on twitter
Share on pinterest
Share on email
Share on print

The Remington RM2599 Maverick Gas Pole Saw is the best gas pole saw based on the value it provides.

It’s that time of the year when you need to prune branches in your garden. But which cutting tool is the best for the job?

Maybe you should use a pruning saw. But with so many branches to prune it would take you ages.

Then how about using a chainsaw. Wouldn’t that be faster? Yes, it would but you would risk life and limb if you stand on a ladder and try to prune branches.

The best tool for pruning hard to reach branches and do it fast is with the help of a pole saw. And if you’re looking for one that will give you great cutting power and portability then it has to be the best gas pole saw.

ProductRatingPrice
Remington RM2599 Maverick Gas Pole Saw1Buy Now
Troy-Bilt TrimmerPlus PS720 8-Inch Gas Pole Saw2Buy Now
Poulan Pro PP258TP Gas Pole Saw3Buy Now
Maxtra Gas Pole Saw4Buy Now

What is a pole saw?

A pole saw is a pruning tool that has a pole with a saw attached on one end.

The long pole will help you cut branches in hard to reach places without the need for a ladder. The saw can be a fixed blade or it can be a motor operated chainsaw.

In most cases, the pole can be extended either by attaching an additional part or with a telescopic extension.

What are the different types of pole saws?

The main classification of pole saws is based on the type of power they use. So they can be manual, electric, and gas pole saws.

Manual pole saw

A manual pole saw is the simplest of the pole saws. It has a pruning saw attached at one end of the pole. You extend the pole, hold the pruning saw at the top of the branch and cut it similar to using a hand pruning saw.

It is the cheapest of the pole saws and has very low maintenance because of no moving parts. The only care you need to take of is the sharpness of the blade and keeping it well oiled before and during use.

The manual pole saw is the most lightweight of pole saws and you won’t have trouble holding it for a long period of time.

Being a manual saw means that you need to do the work of cutting and you will get tired if there are a lot of branches to prune. So for larger cutting jobs, you’ll need to go for the power pole saws like gas or electric ones.

Gas pole saw

A gas pole saw uses a mixture of gas and oil to power the chainsaw attached to it. So it can be used for a long period of time on a full tank of gas making it very portable.

Even if you run out of gas you can just have a spare can and refill it without much downtime. Gas pole saws also have a powerful motor which means you can cut fast.

These reasons make it the perfect tool for someone who has a lot of branches to cut especially pruning professionals.

There are some drawbacks that come with the gas pole saw though. There is the problem of emission because of the fuel. They are also quite noisy because of their powerful motor. And they tend to be complex requiring maintenance of components like air filters, the bar, and chain, as well as the cleaning up residue.

And the performance of the gas pole saw does come with a higher price compared to an electric pole saw.

Electric pole saw

The electric pole saw as you may already have guessed has a motor that runs on electricity. It can either be a corded pole saw that plugs into a power supply or a cordless one that comes with a rechargeable battery.

The corded pole saw is the most lightweight in the category of motor pole saws. Cordless pole saws are heavier than the corded ones because of the battery they carry but they are still lighter than gas pole saws.

The electric pole saws usually have lower power compared to their gas counterparts though that seems to be changing recently.

Electric pole saws also create a lot less noise and pollution than a gas pole saw. They also have low maintenance compared to gas pole saws because you don’t need to worry about the gas and the problems that come with it.

Electric pole saws especially the corded ones tend to be a lot cheaper than the gas pole saws.

Do you need a gas pole saw?

If you often find yourself precariously on a ladder with a saw trying to cut branches, then a pole saw is a good investment for you.

If you just want to trim a few branches and don’t want to spend a lot of money opt for a manual pole saw.

If you’re not in the mood to spend time and energy on manual cutting and just want to trim a few branches in your backyard, then the electric pole saws are a good choice. For a small backyard, a corded pole saw is sufficient but if you need something more portable then opt for a cordless pole saw.

But if you find yourself cutting a lot of branches then you need a lot of cutting power and portability. That’s when a gas pole saw is your best choice.

How to choose a gas pole saw

Weight and weight distribution

When you’re holding the pole saw and cutting branches for several minutes the weight of the pole saw becomes important. Because the heavier the pole saw the faster you will get tired.

Gas pole saws are heavier than their electric counterparts so you’re already dealing with some more weight. But you need to make sure that the weight distribution on the pole saw is even. You don’t want a lot of weight focussed on the cutting end because you will get tired very fast holding such a pole saw.

Pole

The pole should be durable and lightweight. But it should be stable and not wobble much when you have the pole extended for reaching those hard to reach branches. The less wobble the more stable your cutting experience will be.

Materials such as aluminum, steel, and fiberglass are good for making the pole stable and durable.

Bar and chain

The most important part of the pole saw is the bar and chain. It’s good to have the bar and chain made of durable material like steel.

It’s important to have the chain well oiled before and during the cutting. So try to get a gas pole saw that comes with an automatic oiling system. You then don’t have to worry about keeping the chain oiled.

Using the pole saw will cause the chain to lose its tension. A well-tensioned chain is crucial to have the best cutting efficiency and increase the life of your pole saw. So get one that comes with an easy adjustment chain tensioning system where you can just rotate a knob and adjust the tension in the chain. Otherwise, you’ll have to use a wrench to tighten the chain.

Cutting capacity

Cutting capacity measures the thickness of the branch that the gas pole saw can cut.

This is easy to know from the length of the saw. The longer the saw, the thicker branches it can cut. Usually, the saw length varies from 6 to 12 inches.

Before you buy a pole saw just have a look at the branches in your yard that you’ll end up cutting. And choose the gas pole saw based on the average thickness. Do note that if the branch is about 6 inches thick you’ll need a saw that is 8 inches or more to cut it.

Choosing a saw length that is best for your needs will help you lower the cost and maintenance of your saw.

Pole reach

An important factor of the pole saw is the reach. Make sure you choose a pole saw with sufficient reach for the branches in your garden or backyard.

Pole reach means the length that the pole can reach when extended in your arms. So a pole saw with a pole reach of 12 feet is actually less than 12 feet in length.

Gas pole saws have a pole reach from 8 to 15 feet and you can choose one that you think would be needed based on the height of the branches you want to cut.

The pole can be extendable or telescopic. You need to attach an additional piece to increase the length of an extendable pole. But in case of a telescopic pole, you just pull the pole out to increase the length.

Telescopic poles are more convenient but extendable poles are better to split up and store.

Power

Gas pole saws use an engine powered with gas. The power is measured in cc and the more powerful the engine the heavier the pole saw will get.

A 25cc engine should be more than sufficient for pruning branches in your garden or backyard.

Noise

Gas pole saws create more noise than their electrical counterparts due to the powerful engines they possess. So look for pole saws that create as less noise as possible if you don’t want to disturb your neighbors while cutting.

Warranty

Of course, the longer the warranty the better it is for you in case the pole saw has problems.

Most pole saws come with a warranty period of two to four years. And some dealers will give you a deal where you get additional years either by paying a little bit more or buying something else from them.

Price

Like many other things, the higher the quality of the pole saw the more money you have to spend buying it.

If you’re working in a small yard or pruning branches occasionally then you just need a budget gas pole saw that will get the job done. You don’t need to spend your money on the high-end ones.

But if you’re looking to cut a lot of branches and need a professional level pole saw then be ready to spend a few bucks on a high-quality pole saw because the money will be worth the performance and durability that you get.

Precautions when using a gas pole saw

There are a few things to keep in mind when using a gas pole saw.

  • Use the pole saw during the day when there is light so you know what you’re doing.
  • While using the saw be careful and avoid cutting near electrical wires or roofs.
  • Cut the branches at a slow pace and only cut one branch at a time.
  • Be careful that you don’t stand under the branch you’re cutting as it can fall on you.
  • Don’t try to cut a branch thicker than 8 inches with a gas pole saw. Get some professional help for thicker ones.
  • While using the pole saw watch out for a kickback that can happen when the head of the saw touches the branch.
  • Make sure you’re wearing safety gear before using the pole saw. This means use heavy duty clothes, boots, eye and ear protection, gloves, and a hard hat.
  • Before and during use of the pole saw, keep checking the oil level every few minutes. Proper lubrication will help extend the life of your saw.
  • Make sure there are no people or pets near the working area.
  • Hold the chainsaw with a firm grip so it does not slip out and stand in a stable position while cutting.
  • While cutting the branch, don’t force the saw into it. Just place the saw on the branch and let its weight and force do the cutting.

Mixing fuel for your gas pole saw

The gas to oil ratio for your 2-stroke engine should be 50:1. That means 50 parts gas to 1 part oil.

How to use a gas pole saw

  • Make sure the area below the branch you intend to cut is free from people and things.
  • Extend the pole saw to the desired length so you can reach the branch without overextending yourself.
  • Make sure you have a firm grip on the pole saw and standing on firm ground.
  • Give the primer a few pumps before starting the engine so that the fuel is primed.
  • Turn on the choke switch near the back of the engine.
  • Press down on the throttle safety with your palm.
  • Pull the start cord outwards to start the engine.
  • Raise the pole vertically so you can balance it. Then move the pole at an angle to the branch you want to cut.
  • Make sure you’re not standing below the branch but at a safe distance and the saw is at an angle.
  • Press the throttle as much as you need and make a jump cut below the branch that you need to cut. This will help the branch to fall predictably.
  • Stop the throttle, place the saw on the top of the branch and allow it to rest its weight on the branch.
  • Increase the throttle and make a small wedge in the branch so it will not slip as you cut.
  • Then start cutting the branch with a light steady pressure allowing the saw to do the cutting.
  • Stay in control and don’t raise your arms over your head.
  • When you’re done cutting, stop the chainsaw and clear the work area of all the wood.

Maintaining your gas pole saw

It’s important to maintain your gas pole saw so it can last you for a long time.

  • Before and after using the pole saw make sure to check the screws, nuts, and bolts for damage or wear and tear. If there is some damage then you’ll need to replace them.
  • Make sure the cutter is sharp before using the saw. Tighten the chain to the saw before using it. And after using it loosen the chain so it lasts longer.
  • Before using the pole saw, make sure the saw is manually oiled up. And also make sure the oil tank is full.
  • Check if the air filter is functional or you need to replace it. Check if there is any fuel leak from the engine, fuel lines, or the tank.
  • Make sure the starter cord is in working condition and vibration dampers are working fine. Also, check if the start plug is fine or you’ll need to replace it.
  • After using the pole saw, clean it up using a damp cloth. And keep the pole saw in a dry ventilated place.
  • If you’re not going to use the gas pole saw for a while, remove the fuel and store it in a can with some fuel stabilizer.
  • Keep the pole saw locked away to protect it from damage and unwanted attention from children.

Reviews

Sale
Remington RM2599 Maverick 25cc 2-Cycle 8-Inch Gas Pole Saw
  • This gas pole saw is an easy-to-use design used to cut limbs and branches without the need of a ladder
  • 25cc 2-cycle engine has plenty of power to conquer tough tasks
  • 8-inch bar and chain are mounted on a 7-foot extention pole, allowing the user to reach up to 12 feet
  • The auto oiler maks sure the chain is always properly lubricated
  • Accepts most attachments, which turn this saw into a blower, hedge trimmer, edger, and more. Refer in maunal for: Page 2: Service Page 8: Assembly Page 12: Operation Page 14: Maintenance Page 19: Troubleshooting

Last update on 2019-05-22 // Source: Amazon Affiliates

The Remington RM2599 Maverick is a 25cc 2-cycle gas pole saw that comes with an 8-inch bar and chain.

The 25cc engine should give you sufficient power when you’re looking to cut lots of branches in your garden or backyard. It comes with a QuickStart technology so you should not have trouble starting the engine up fast.

This pole can be extended up to 7 feet which makes it attain a pole reach if 12 feet when you hold it extended. This means you will be able to easily cut hard-to-reach branches.

The 8-inch bar and chain come with a low kickback technology so you should be able to cut branches up to 6 inches thick without any problems.

The Remington RM2599 weights about 17.5 pounds which makes it moderately heavy but you should not have problems carrying it around because of the good weight distribution on the pole saw.

The pole saw comes with an automatic oiling system which is good because you don’t need to worry about constantly keeping the bar and chain oiled while cutting branches.

One additional benefit of the Remington RM2599 Maverick is that it can be used with several attachments. So you can use it as a blower, hedge trimmer, edger, and others based on the attachment you apply.

The Remington RM2599 comes with a limited two-year warranty on the pole saw which is a good thing to have.

This pole saw comes at a budget price for the gas power that you get but it’s not the most powerful of gas pole saws. So if you’re looking for a commercial quality pole saw this one is not for you.

There is also the problem that automatic oilers have where they leak oil when kept in the wrong position during storage.

And it does not have an adjustable chain tensioning system which means you’ll need to use a wrench to adjust the right chain tension.

ProsCons
  • Inexpensive
  • Automatic Oiler
  • Two-year warranty
  • QuickStart technology
  • Several attachments available
  • Average power
  • Leaks oil in storage
  • No easy chain tensioning system

Buy Now

Sale
TrimmerPlus PS720 8-Inch Pole Saw with Bar and Chain
  • This pole saw's expansive height makes it perfect for trimming high branches
  • 8-inch bar and chain with auto oiler saws through branches
  • Connects to attachment-capable trimmers, including Troy-Bilt, Remington, and Craftsman
  • Backed by a 2-year limited warranty. Extended boom has two height options, up to 11 ft reach (depending on operator height)
  • Reach up to 12 feet with a 7-foot pole and saw (depending on operator height), 2 extension sections allows for 2 height options

Last update on 2019-05-22 // Source: Amazon Affiliates

The Troy-Bilt TrimmerPlus PS720 gas pole saw has an 8-inch bar and chain that comes with a 25cc 2-cycle engine.

The pole can be extended to 7 feet which gives it a pole reach of about 12 feet when you hold it in your hands.

The 8-inch Oregon bar and chain is of good quality and should be sufficient to cut through branches that are up to 6 inches thick.

There is no easy tensioning system and you’ll need to use a flat head screwdriver to have the right chain tension.

Also, the entire saw housing is made of a plastic resin instead of aluminum. This should not be a problem for regular home use but it would have been a nice touch.

It comes with an automatic oiler which saves you the effort of keeping your bar and chain oiled before and during use of the pole saw. The drawback with such automatic oilers is that they tend to leak oil if not kept in the right position during storage.

The engine is sufficiently powerful to cut several branches in your backyard.

The Troy-Bilt TrimmerPlus PS720 has a unique feature where it can be used with attachments such as leaf blowers, hedge trimmers, edgers of other companies like Remington, Craftsman, and Troy-Bilt.

This pole saw is very low in price and comes with a limited two-year warranty which is a good thing. So if you’re looking to trim a few branches in your backyard and don’t want to spend a lot of money, then the TrimmerPlus PS720 seems like a good choice.

ProsCons
  • Inexpensive
  • Relatively lightweight
  • Can use attachments
  • Automatic Oiler
  • Decent power
  • Leaks oil in storage
  • Plastic saw housing
  • No easy chain tensioning system

Buy Now

Poulan Pro PP258TP 25cc Pole Pruner
  • 8-inch saw bar cuts branches up to 6 Inch in diameter
  • 2-stroke 25cc engine
  • 12-foot total reach
  • Surefire starting with Spring Assist
  • Pro Link Attachment Capable

Last update on 2019-05-22 // Source: Amazon Affiliates

The Poulan Pro PP258TP pole saw comes with a 25cc 2-stroke gas engine that is powerful enough to cut through tree branches fast.

It has an 8-inch bar and chain that makes it possible to cut branches that are up to 6 inches thick.

The engine has a SureFire start technology with spring assist which means you should be able to start it with little effort.

The pole saw weighs 20 pounds which is not the most lightweight of gas pole saws but the weight is evenly distributed so you should not have problems carrying it around.

The pole reach is 12 feet that is pretty decent to reach tree branches you want to cut. It is not a telescopic pole but an extendable one where you need to add an additional part to extend it.

This pole saw does have an automatic oiling system that will keep the bar and chain well-oiled during use. You definitely want that because it will keep your cutting smooth and efficient and will increase the life of the chain.

There does not seem to be an easy adjustment chain tensioning system so you’ll have to make use of a wrench to adjust the correct tension in the chain.

The Poulan Pro PP258TP comes with ProLink support which means it’s possible to have attachments for other purposes such as hedge trimmers, edgers, leaf blowers, etc.

The Poulan brand is owned by Husqvarna that produces some good quality cutting tools so you can be assured of quality with this pole saw. The pole saw comes with a limited two-year warranty on it which is pretty good.

ProsCons
  • SureFire quick start
  • Good cutting power
  • ProLink attachment feature
  • Two-year warranty
  • No easy tension adjustment
  • Heavy

Buy Now

Maxtra Gas Pole Saw, 42.7CC 2-Cycle 8.2FT to 11.4 FT Extendable Cordless Gas Chainsaw,Powerful Long Reach Tree Trimmer Pruning Chain Saw with Portable Bag
  • [POWERFUL ENGINE]: Super powerful 2-stroke 42.7cc engine,which is perfect balance the weight and power. It's light weight than other bigger 52cc engine and powerful than other small engine. It's perfect for landscape business owner and those who own their own garden.It can trim 7-8 inch branches effectively
  • [HUMANIZATION DESIGN]: We specially provide a portable bag ,which is convenient for carry and store the chainsaw.Air filter provides engine protection and provides longer life.Shoulder strap can handle can help reduce the Vibration and fatigue in use
  • [ADJUSTABLE EXTRA LENGTH]: This gas powered pole chainsaw can be adjust from 8.2 to 11.4 FT with a 3.6 FT extension pole.so,you can easily cut down the branches of 13-16.5 ft on the ground.That is safer when you trim big trees and high branches
  • [QUICK-START TECHNOLOGY] : newly improved engine use the advanced quick-start technology, which means the engine will start within 3-4 times pull
  • [1 YEAR WARRANTY]: One year warranty!! Please feel free to contact us ,if you have any problem.we will response within 24 hours

Last update on 2019-05-22 // Source: Amazon Affiliates

The Maxtra gas pole saw comes with a massive 42.7 cc 2-stroke gas engine that will make cutting tree branches a breeze.

The length of the bar and chain is 10 inches which is quite long and you will be able to cut branches that are up to 8 inches thick.

The pole saw comes with an inertia-type safety chain brake that is very useful in case of kickback so it can help you avoid major injury.

The Maxtra gas pole saw comes with an automatic oiler system that will help keep the chain well oiled when it is in use. This will improve cutting efficiency and the life of the saw.

It does not have an easy adjustment chain tensioning system which means you need to have a wrench handy to adjust the tension before using the pole saw.

It comes with an anti-vibration system that will help reduce the amount of fatigue you face when using this pole saw for long periods of time.

The pole saw weighs about 21 pounds which is moderately heavy because of the bigger engine. However, you should be able to carry it around for a while because the weight distribution seems good.

The shoulder strap that comes with the pole saw is not the best and you may end up buying a more comfortable one.

The manual that comes with the Maxtra gas pole saw is not good enough to help you assemble it so you will end up looking the information online.

It comes with just a limited one-year warranty which is less than other pole saws that have a minimum two-year warranty.

ProsCons
  • Powerful 42.7 cc motor
  • Long 10-inch bar
  • Inertia-type safety chain brake
  • Automatic oiling system
  • Good anti-vibration system
  • Heavy
  • Limited one-year warranty
  • No easy adjustment tensioning

Buy Now

Conclusion

No longer do you need to worry about how you are going to prune the many branches in your yard.

No longer do you need to risk yourself on a ladder with a pruning saw or even worse a chainsaw.

No longer do you need to tire yourself out cutting away at those branches.

Choose the right gas pole saw for your needs and you’ll be well on your way to having the best backyard you can have.

In our opinion, the Remington RM2599 Maverick is the best value for money pole saw that you can buy for your regular gardening needs. It is lightweight, durable, and gives you decent cutting power for the regular trimming tasks in your garden.

If you’re looking for a budget version of the pole saw for the occasional pruning needs of your garden then take a look at the Troy-Bilt TrimmerPlus PS720 gas pole saw. It’s very cheap but still durable and gets the job done without burning a hole in your pocket.

Share on facebook
Share on twitter
Share on pinterest
Share on email
Share on print

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.